Range Rover P38
WIPERS AND WASHERS
5
REPAIR
REAR WIPER MOTOR
Service repair no - 84.35.12
Remove
1. Remove wiper arm nut cover. Remove nut.
2. Remove wiper arm from motor spindle.
3. Remove motor spindle cover, retaining nut and
seal.
4. Open tailgate.
5. Remove 6 screws securing wiper motor cover.
6. Disconnect motor multiplug.
7. Remove 2 bolts securing motor. Remove motor.
8. Remove 4 bolts securing mounting plate to
motor.
9. Release multiplug holder. Remove mounting
plate.
10. Remove sealing rubber from motor spindle.
