Range Rover (LM) V8-4.4L (2009)
17. Reposition the safety belt through the rear seat cushion cover and the rear seat cushion.
^
Remove and discard the safety belt bolt from the rear seat base.
18. Remove the rear seat backrest cover safety belt trim panel.
^
Remove the 2 screws.
19. Release the rear seat backrest cover from the rear seat backrest.
20. Remove the rear seat backrest catch trim panel.
^
Carefully release the 4 clips.
21. Reposition the rear seat backrest cushion and cover from the rear seat backrest for access.
22. Reposition the safety belt through the rear seat backrest cushion and cover.
23. Using a suitable tool, release the head restraint guide tubes.
^
Release the 6 clips.
24. Remove the rear seat backrest cushion and cover from the rear seat backrest.
^
Reposition the safety belt.
25. NOTE: Do not disassemble further if the component is removed for access only.
Remove the rear seat backrest cover from the rear seat backrest cushion.
^
Remove and discard the 16 clips from the rear seat backrest cover.