IS 250C V6-2.5L (4GR-FSE) (2011)
1. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
(a) Temporarily install the front seat outer belt assembly with the 2 bolts.
(b) Fully tighten the bolt [A] first, then the bolt [B] to install the front seat outer belt assembly.
bolt A - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
bolt B - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(c) Connect the pretensioner connector and lock the locking button as shown in the illustration.
NOTICE:
Securely lock the locking button.
(d) Connect each connector.
(e) Install the shoulder anchor of the front seat outer belt assembly.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY (for LH Side)
(a) Pass the floor anchor of the front seat outer belt assembly through the front quarter trim panel assembly.
(b) w/ Front Center Speaker:
(1) Connect the connector.
(c) Engage the 4 clips.
(d) Install the front quarter trim panel assembly with the 5 bolts.