IS 250C V6-2.5L (4GR-FSE) (2011)
(2) Disengage the 2 clamps.
(3) Pass the wire harness for floor anchor of the front seat outer belt assembly through the floor carpet and disconnect the front seat outer belt
assembly.
(e) w/o Belt Tension Sensor:
(1) Remove the bolt.
14. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY (for RH Side)
(a) w/ Front Center Speaker:
(1) Disconnect the connector.
(b) Pass the floor anchor of the front seat outer belt assembly through the front quarter trim panel assembly and remove the front quarter trim panel
assembly.
15. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
(a) Remove the shoulder anchor with bolt of the front seat outer belt assembly.
(b) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner
connector as shown in the illustration.
HINT
Tape the screwdriver tip before use.
(c) Disconnect each connector.
(d) Remove the 2 bolts and the front seat outer belt assembly.
Installation
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION