IS 250C V6-2.5L (4GR-FSE) (2011)
(b) Remove the 5 bolts.
(c) Using a moulding remover, disengage the 4 clips.
(d) w/ Front Center Speaker:
(1) Disconnect the connector.
(e) Pass the anchor part of front seat outer belt through the front quarter trim panel assembly and remove the front quarter trim panel assembly.
13. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY (for RH Side)
(a) Remove the belt guide.
(1) Using a moulding remover, disengage the 3 claws.
(2) Disengage the 3 guides and remove the belt guide.
(b) Remove the 5 bolts.
(c) Using a moulding remover, disengage the 4 clips.
(d) w/ Belt Tension Sensor:
(1) Remove the bolt and disconnect the connector.