LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1817005.png)
Torque: 19 Nm (195 kgf-cm, 14 ft-lbf)
(b) Install the 4 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft-lbf)
2. INSTALL PUSH ROD PIN
(a) Apply lithium soap base glycol grease to the push rod pin.
(b) Set the master cylinder push rod clevis in place, insert the push rod pin from outside of the vehicle and then install a new clip.
3. INSTALL BRAKE PEDAL RETURN SPRING
(a) Install the spring between the pedal and steering column as shown in the illustration.
4. CONNECT CONNECTORS
