Navigator 4WD V8-5.4L SOHC VIN L (1998)
Torque Converter: Service and Repair
Removal and Installation
1. The torque converter must be replaced if one or more of the following statements are true:
-
A torque converter malfunction has been determined based on the complete diagnostic procedures.
-
Converter stud(s), impeller hub or bushing is damaged.
-
Discoloration of the torque converter (due to overheating).
-
The torque converter is found to be out of specification when performing one of the following torque converter checks:
-
One-Way Clutch Check
-
End Play Check
-
Stator to Turbine Interference Check
-
Stator to Impeller Interference Check
-
Torque Converter Leak Check
-
Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes:
-
major metallic failure
-
multiple clutches or clutch plate failures
-
sufficient component wear which results in metallic contamination.