B3000 V6-3.0L (2007)
Impact Sensor: Service and Repair
FRONT IMPACT SEVERITY SENSOR
Front Impact Severity Sensor
Removal
WARNING:
-
Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.
-
Vehicle sensor orientation is critical for correct restraint system operation. If a vehicle equipped with an SRS is involved in a collision,
inspect the sensor mounting bracket and wiring pigtail for deformation. Replace and correctly position the sensor or any other damaged
SRS components whether or not the air bag is deployed.
-
To reduce the risk of personal injury, do not use any memory saver devices.
NOTE:
-
The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
