Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
1. Lubricate a new piston seal with brake fluid and install the new piston seal in the piston bore. Lubricate the piston bore and the caliper piston with
Ford High Performance DOT 3 Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification ESA-M6C25-A.
2. Install a new dust seal on the caliper piston.
3. Install the caliper piston in the piston bore.
CAUTION: Do not scratch or damage the caliper piston when installing it into the piston bore.