Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
13. Use a feeler gauge to measure the clearance between the oil distributor sleeve seal and the ring groove.
14. The oil distributor sleeve seal side clearance should measure 0.08-0.23 mm (0.0031-0.0091 inch). If the oil distributor sleeve seal side clearance
is above specification, replace the 3-4 clutch drum and input shaft.
ASSEMBLY
1. Install a new 3-4 clutch D-ring and 3-4 clutch oil seal onto the 3-4 clutch piston.
NOTE: Apply transmission fluid to the 3-4 clutch D-ring and 3-4 clutch oil seal prior to installation.
2. Install the 3-4 clutch piston by turning it slowly.
NOTE: Apply transmission fluid to the inner surface of the 3-4 clutch drum and input shaft.
3. Install the 3-4 clutch piston return springs and 3-4 clutch piston spring retainer on the 3-4 clutch piston.