Lancer Evolution L4-2.0L DOHC Turbo (2003)
NOTE: Also check joint connector C-05, intermediate connector C-129 and junction block connector C-210 for loose, corroded, or damaged terminals,
or terminals pushed back in the connector. If joint connector C-05, intermediate connector C-129 or junction block connector C-210 is damaged, repair
or replace the damaged components) as described in, Harness Connector Inspection.
Q:
Is the wiring harness between ETACS-ECU connector C-226 (terminal 20) and the battery in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The system should communicate with the ETACS-ECU normally.
STEP 4.
Check the ground circuit to the ETACS-ECU. Measure the resistance at ETACS-ECU connector C-226.
