Montero XLS 4WD V6-3.5L SOHC (2001)
YES: Replace the ETACS-ECU. The front passenger's door switch input signal should be able to be checked and the functions, which are described in
the "Technical Description (comment)," should work normally.
NO: Repair them. The front passenger's door switch input signal should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
STEP 8. Check rear door switch (LH) connector F-09 and ETACS-ECU connector D-222 for damage.
Q: Are rear door switch (LH) connector F-09 and ETACS-ECU connector D-222 in good condition?
YES: Go to Step 9.
NO: Repair or replace them. Refer to Harness Connector Inspection. The rear door switch (LH) input signal should be able to be checked and the
functions, which are described in the "Technical Description (comment)," should work normally.
STEP 9. Check the harness wires between rear door switch (LH) connector F-09 and ETACS-ECU connector D-222.
