Prowler V6-3.5L VIN G (1999)
Timing Belt System
1. Place crankshaft sprocket to the TDC mark on the oil pump housing.
Dial Indicator Locating Piston At TDC
2. Install a dial indicator in number 1 cylinder to check TDC of the piston. Rotate the crankshaft until the piston is at exactly TDC. This is important
for good engine performance.
Camshaft Alignment Special Tool 6642
3. Install the camshaft alignment Special Tools 6642 to the rear of each cylinder head.
4. When tensioner is removed from the engine it is necessary to compress the plunger into the tensioner body.
