Prowler V6-3.5L VIN G (1999)
5. Position the upper retainer on the coil spring so the end of the upper coil is not positioned at the cut-out in the retainer.
6. Relieve all tension from the spring compressor. After all spring tension has been remove from the spring compressor, remove it from the coil
spring.
7. Install the shock absorber back in the vehicle.
Rear
CAUTION: Do not clamp the shock absorber in a vise by the body of the shock absorber. The shock absorber must be clamped in the vise only using
the clevis of the shock absorber.
DISASSEMBLY
1. Install the shock absorber vertically in a vise, using the clevis of the shock absorber.
2. Mark coil spring and shock absorber assembly right or left, according to which side of the vehicle the shock absorber was removed from, and
which shock absorber the coil spring was removed from.
WARNING: When compressing the coil spring for removal from the shock absorber, the first full top and bottom coil of the coil spring
must be fully captured by the jaws of the spring compressor.
3. Compress shock absorber coil spring using Professional Services Equipment Spring Compressor GP-2020-C3.5 or an equivalent. The spring
