911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-286024.png)
Moving piston-pin circlip into installation position
45. Check installation position of piston-pin circlip in assembly tube.
Installation position of piston-pin circlip in assembly tube
46. Insert assembly tool 9602/1 with piston pin circlip and piston pin through the centering aid 9602/5 into the crankcase. Press piston pin into
assembly bore of piston/connecting rod eye.
Piston pin and circlip on assembly tool 9602/1
47. Groove in assembly tube must sit on dowel pin of centering aid 9602/5.
