911 Carrera Cabriolet (997) F6-3.6L (2007)
NOTE:
-
Only for removal of the rear left hardtop locking mechanism.
-
Once a trim panel has been clipped in, the old plastic clips are no longer usable and must always be replaced.
5. Clip in lining -2- at the sides to the hardtop body -1-.
NOTE: Only for removal of the rear left hardtop locking mechanism.
6. Insert support for centring peg -2- and tighten with fastening screw -1-. Tightening torque -] Tightening torque : 10 Nm (7.5 ftlb.)
Subsequent work
NOTE: Only for removal of the rear left hardtop locking mechanism.
1. Install hardtop. Refer to Removing and installing hardtop
2. Adjust hardtop. Refer to Adjusting hardtop