911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Position pulley -C- and install it with the Seeger circlip ring -E-.
4. Secure electric line on the compressor with the fastening screw.
5. Position the air-conditioning compressor with fuel cooler on the engine and use the three fastening screws -5- to secure it to the engine. -
Tightening torque: 23 Nm (17 ftlb.)
6. Fit the two cap nuts -4- for the fuel cooler and tighten them.
7. Connect the electric line for the air-conditioning compressor and clip it onto the bracket behind the oil-filter console.
8. Position the pressure plate -A- and secure in place with the fastening screw -1-. - Tightening torque: 14 Nm (10.5 ftlb.)