911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Loosen pressure and return lines at the steering gear. To do this, loosen the hexagon socket head bolt -arrow- and remove the retainer plate (with
the front wheels turned in as required). Close off lines or use a collecting container.
Retainer plate
3. Open the line bracket -arrow-, unclip the return line and remove it.
Line bracket
Installing steering return line
1. Insert new return line in the vehicle. Do not close line bracket yet near the connection point for the rear sill area on the left.
2. Fit (attach) the return line (thicker line) at the connection point.
Plug-in coupling for pressure and return lines
2.1.
Fit (attach) the return line (thicker line) - up to model year 2008
Before inserting the return line, remove the holder collar and screws, which are no longer required, from the connector on the rear return line.