911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Cross member
Insert cross member -14- and fit M12 x 80 bolts -15, 16-.
5. Install diagonal braces -10-.
Diagonal brace
Fit diagonal braces -10- and screw in (fit) screws -12, 13-.
6. Install the transverse strut.
Fit transverse strut and screw in (fit) screws.
7. Fit brake hose bracket on the rear-axle carrier side section.
Removing and installing diagonal arm
8. Install diagonal arm -17-.
8.1.
Insert diagonal arm -17- and fit it on the wishbone -21-. To do this, screw in (fit) bolts -19, 20-.