Cayenne S (9PA) V8-4.5L (2003)
Clutch master cylinder
-A- - Pressure line connection to clutch slave cylinder
-B- - Supply
-C- - Dust boot
-D- - Pushrod
1. Remove brake fluid by suction below MIN mark in reservoir.
Information
Brake fluid is hygroscopic! Seal all lines immediately with suitable plugs.
Brake fluid will flow from the lines. Protect body in the area under the clutch master cylinder (e.g. with a cleaning cloth).
2. Loosen pressure line from clutch master cylinder to slave cylinder -A-. To do this, remove safety clip to the stop using a screwdriver -direction of
arrow-.
Removing safety clip for pressure line connection from clutch master cylinder
3. Open safety clip. The pressure line can now be pulled off -arrow-.