Astra L4-1.8L (2009)
8. Remove the engine damping block (1) from the side member and the engine damping block support.
Remove the 6 bolts.
9. Remove the engine damping block with the bracket.
10. Remove the bracket (2) from the engine damping block.
Remove the bolt.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the bracket to the engine damping block.
Tighten the bolt to 55 Nm (40 lb ft).
2. Remove the engine damping block from the vice.
3. Install the engine damping block.