L Series V6-3.0L VIN R (2004)
7. Install the O-ring onto the oil filter housing.
8. Install the oil filter housing onto the engine block and tighten.
^
Tighten the oil filter cartridge housing-to-engine to 45 Nm (33 ft. lbs.).
9. Install the oil filter element, the O-ring, and the oil filter cap onto the housing.
^
Tighten the oil filter cap to 15 Nm (11 ft. lbs.).
10. Install the crank sensor.
11. Install the crank sensor bolt.
^
Tighten the crankshaft position sensor bolt to 8 Nm (71 inch lbs.).
12. Install the coolant bridge and install the coolant bridge lower seals.
13. Install the coolant bridge upper seals and the coolant bridge bolts.
^
Tighten the coolant bridge bolts to 30 Nm (22 ft. lbs.).
