LW200 L4-2.2L VIN F (2003)
11. Install rotor and tighten rotor screw.
^
Front Rotor-to-Hub: 3.5 Nm (27 inch lbs.)
IMPORTANT: Apply Loctite 242(r) threadlocker (or equivalent) on threads of caliper bracket bolts.
12. Install caliper mount bracket onto knuckle.
^
Caliper Mount Bracket-to-Knuckle: 95 Nm (70 ft. lbs.)
13. Install stabilizer bar link to strut assembly.
^
Stabilizer Bar-to-Stabilizer Bar Link: 65 Nm (48 ft. lbs.)
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors. Failure to do so can cause wheel bolts
to loosen in service.
