xA L4-1.5L (1NZ-FE) (2006)
b. Sufficiently apply compressor oil to a new O-ring and liquid tube.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring to the liquid tube.
d. Install the liquid tube sub-assembly to the condenser with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
3. CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
a. Remove the vinyl tape attached to the hose and condenser.
b. Sufficiently apply compressor oil to a new O-ring and hose joint.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring to the cooler refrigerant discharge hose.
d. Connect the No. 1 cooler refrigerant discharge hose to the condenser with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
4. INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY
a. Install the hood lock support with the 2 bolts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
b. Install the clip.
5. INSTALL HOOD LOCK ASSEMBLY
a. Install the hood lock with the 3 bolts.