Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk101 · Power transmission
01 · Transmission

Removing and installing parking lock

Make
SEAT
Model
Leon Mk1
Section
7-speed dual clutch gearbox 0AM › Gearbox,mechanics,gears,shafts,internal operation › Removing and installing parking lock
Power transmissionRemoving and installing parking lock
Removing and installing parking lock
–  Remove selector lever cable from gearbox.
Information about selector lever cable:
→ Chapter „Selector lever and gear selection mechanism, vehicles up to 02.2009: Removing and installing“.
→ Chapter „Selector lever and gear selection mechanism with gear selector cable: removal and installation, from 03.2009“
–  Remove parking lock cover.
   
–  Remove 3 bolts with socket -3410-.
–  Always renew bolts.
Tightening torque
20 Nm, 90° turn further
–  Remove parking lock.
  N35-10250

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

As an Amazon Associate we earn from qualifying purchases.