seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Exhaust system > < Removing and installing the theft secured engine control unit

Leon Mk1

Removing and installing air cleaner
Removing and installing air cleaner
Removing
   
–  Pull coolant hose upwards out of brackets -arrows-.
Continuation for all vehicles
–  Press fastener -1- and pull intake air duct cover out upwards.
  N24-10255
–  Press fastener -arrows- and pull intake air duct upwards.
–  Release spring-type clip -1- and pull intake hose and vacuum hose off air filter.
  N24-10256
–  Loosen securing bolt -2- and pull air filter housing upwards from locating pins -arrows-.
Fitting
Installation is carried out in the reverse order to removal, observing the following:
–  Push air filter housing onto locating pins -arrows- from above.
  N24-10257
–  Tighten new securing bolt -2- to 8 Nm and slide spring-type clip -1- with intake hose onto air filter connection.
  N24-10257

Exhaust system > < Removing and installing the theft secured engine control unit