seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Adjust the clutch cable > < Removing

Leon Mk2

Installation
Installation
–  Pull the clutch cable through the bulkhead and fit the bellows.
–  Lubricate the clutch cable securing/clutch pedal area with -G 052 142 A2- grease.
   
–  Secure the clutch cable to the clutch pedal -arrow-. Replace the plastic tie that was cut when disassembling.
–  Fit the bellows to the wall of the bulkhead.
  V30-0397
–  Hook the clutch cable to the clutch release lever as described below:
–  Fit the rubber stop -A- into its location in the gearbox casing.
–  Fit the clutch cable -B- into its location on the clutch release lever.
–  Between the clutch release lever and the clutch housing there must be a return spring fitted.
–  Secure the clutch cable to its location.
  N30-0161
Fit the protective cover (upper and lower parts) to the pedal assembly bracket, in the reverse order to disassembly → Anchor
–  Secure electric cables to their original positions.
–  Fit main junction box to its bracket.
–  Fit the footwell area cover: → General body repairs-assembly work, interior; Rep. Gr.70
–  Fit the shelf on driver's side: → General body repairs-assembly work, interior; Rep. Gr.68
  E30-0065

Adjust the clutch cable > < Removing