seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch actioning: repair > < Removing

Leon Mk2

Installation
Installation
–  Lubricate contact surfaces with MoS2grease.
–  Fit the clutch pedal to the pedal shaft with the bush and the washer.
–  Fit the clutch and brake pedal shaft as far as it will go; move the brake pedal if necessary.
–  Remove bolt M8 or the punch on the right.
–  Fit the washer and tighten the nut to 25 Nm.
   
–  Secure the clutch cable to the clutch pedal -arrow-.
–  Fit the clutch cable on the gearbox → Chapter.
  V30-0397
–  Fit the cover to the support block -arrows-.
–  Bolt on the relay plate and the fuseholder; check the cable and relay connectors; securing them if necessary.
–  Fit the cover and the shelf situated below the dash panel: → Bodywork repairs, installation work, interior; Rep. Gr.68.
Clutch cables with automatic adjustment
–  Fit the clutch cable on the gearbox → Chapter.
–  Checking the functioning of the clutch cable with automatic adjustment → Chapter.
Clutch cable for vehicles with steering wheel on the right
–  Fit the clutch cable on the gearbox → Chapter.
–  Carrying out clutch pedal adjustment → Chapter.
  N30-0124

Clutch actioning: repair > < Removing