seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing > < Pedal mechanism, clutch pump - Assembly overview

Leon Mk2

Remove and install bearing bracket and master cylinder
Remove and install bearing bracket and master cylinder
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter.
   
Special tools and workshop equipment required
t  Circuit clamp (female) -SAT 1210-, see equivalent → Anchor
t  Circuit clamp (male) -SAT 1211-, see equivalent → Anchor
t  Torque wrench kit -SAT 8010-, see equivalent → Anchor
t  Pliers -T20029-, see equivalent → Anchor
t  Hose clamp -U 30042-, see equivalent → Anchor

  Note
t  Brake fluid is toxic. It should not come into contact with the paintwork due to its corrosive effects.
t  When handling the brake fluid hoses, place a large protective cover or cloth with no loose threads under the clutch master cylinder.
t  Always replace bolts and gaskets.
t  The clutch master cylinder is removed from the interior of the vehicle.
   

Removing > < Pedal mechanism, clutch pump - Assembly overview