Leon Mk2
| Glass cover for the sunroof - adjusting |
| Zero position |
|
Caution
| Carry out following work: |
| – | Move the glass cover of the panorama roof to the „closed“ position. |
| – | Perform the height adjustment of the glass cover front and rear, on both sides in the manner indicated below: |
| Adjusting the cover at the front: |
| -Dimension "a"- = 1 mm lower than the fitting frame -3-. |
| Adjusting the cover at the rear: |
| -Dimension "b"- = 1 mm higher than the edge of the roof -2-. |
| – | Open the cover and tighten the screws at the front and rear (5.5 Nm). |
Note| t | Check that the sunroof locks and operates correctly. |
| t | In doing so, no point on the glass panel should be higher at front or lower at the rear than the roof. |
