seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Refitting (Clutch cable untensioned) > < Removing

Leon Mk2

Refitting (Clutch cable tensioned)
Refitting (Clutch cable tensioned)
–  Lubricate with -MoS2- grease where the end of the clutch cable fits into the clutch pedal.
–  Pass the clutch cable through the dashboard and fit the bellows.
–  Attach the cable to the clutch pedal
–  Fit the rubber stop in the gearbox support.
–  Fit the clutch cable in the declutching lever.
–  Attach the cable to the support.
   
–  Remove the fixing tape after fitting the clutch cable -arrows-.
–  Make sure that the clutch cable works properly → Chapter.
  N30-0136

Refitting (Clutch cable untensioned) > < Removing