Leon Mk2
Assembly diagram - mechanics |
Note!
Before replacing the clutch cable, check that it works correctly → Chapter |
1 - | Clutch cable |
q | Checking action → Chapter |
q | Removing and fitting → Chapter |
2 - | Clutch cable |
q | With integrated damper -arrow- |
q | Checking action → Chapter |
q | Removing and fitting → Chapter |
3 - | Rubber block |
4 - | Washer |
5 - | Receiving plate |
q | To secure the clutch cable to the clutch pedal |
6 - | Bellows |
7 - | Support |
q | Removing and fitting → Chapter, Assembly diagram - pedal bracket |
8 - | Clutch pedal |
q | Removing and fitting → Chapter |
9 - | Elastic stop |
10 - | Clutch release lever |
11 - | Washer |
12 - | Hexagon nut |
q | 25 Nm |
13 - | Counterweight |
q | Correspondance → Parts Catalogue |
14 - | Fixing components/clutch cable |
q | Ther are eliminated if a counterweight is fitted, item → Item |
15 - | Counterweight |
q | Correspondance → Parts Catalogue |
q | Fitted together with the clutch cable → Item |
16 - | Rubber block |
17 - | Gear change |
18 - | Rubber guide |
19 - | Support |
20 - | Double bolt |
q | 10 Nm |