seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel tank: Removing and installing > < Rules for cleanliness

Leon Mk2

Removing and installing fuel cooler
Removing and installing fuel cooler
t  Removing → Anchor
t  Installing → Anchor
Special tools and workshop equipment required
   
t  Torque wrench -SAT 8010-
Removing
Observe rules for cleanliness → Chapter.
  Note
The fuel radiator is located on the fuel return tube to the fuel tank. It is fitted low down in the vehicle.
–  Separate the under body covering.
  W00-2760
–  Remove the cover -A- (if one is fitted).
–  Disconnect the fuel tubes on the fuel radiator.
–  Unscrew nuts -arrows-.
Installing
Installation is carried out in the reverse order of removal while noting the following:
–  Tighten the radiator bolts to a torque of 15 Nm.
  N20-0294

Fuel tank: Removing and installing > < Rules for cleanliness