| t
| Pliers for strip clamps -T20029- |
| t
| Anti-freeze protection checker |
| –
| Separate the upper coolant hose from the radiator. |
| –
| Remove the connectors from the heat switch and the fan motor. |
| –
| Remove the fan screen and the fan(s). |
| –
| Loosen the radiator securing bolts and remove the radiator. |
| Vehicles with an air conditioner: |
| –
| Follow the additional indications and assembly work sequences → Anchor. |
| Carry out assembly in the reverse order, following these steps: |
Caution | Do not open the air conditioner cooling agent circuit. |
|
Note! | To avoid damage in the condenser and in the cooling agent tubes/hoses, be sure not to excessively bend, twist or stretch the tubes/hoses. |
| –
| Unscrew the clamp(s) from the hoses of cooling agent. |
| –
| Set the lock holder cover in the service position, with the help of the centring part of -T20089-. |
| –
| Remove the fasteners from the left side of the radiator. To do so, the left headlight must be removed. |
| –
| Remove the condenser from the radiator. |
|
| Fix the condenser to the bodywork so that the tubes/hoses of cooling agent are loose. |
|
|
|
