Leon Mk2
Cooling system components, engine side |
Thermostat side |
1 - | Bolt with cutting thread |
2 - | Towards the expansion tank |
q | → Item |
3 - | Towards the flexible coolant liquid hose, upper part |
q | → Item |
4 - | Coolant liquid thermostat |
q | Test function: Heat the thermostat in water. The tip of the heat element should emerge. |
q | Temperature test: Beginning of aperture (approx. 84 °C) and end (approx. 98 °C) not possible |
5 - | O-ring |
q | Renew |
6 - | Thermostat housing |
7 - | Coolant liquid temperature sender -G62- |
q | With sender to indicate coolant temperature -G2- |
8 - | Fastening clip |
9 - | Towards the heat exchanger |
10 - | 20 Nm |
11 - | From the heat exchanger |
12 - | Towards the front coolant hose |
q | → Item |
13 - | 10 Nm |
14 - | Coolant liquid hose |
15 - | From the expansion tank |
q | → Item |
16 - | Bleed screw, 25 Nm |
q | According to versions |
q | Renew the O-ring |
q | Fit with -D 000 600 A2- |
17 - | Support |