SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder Fuel-injection engine (1.4l, 4 valves) | Engine cylinder head, valve gear | Cylinder head

Distribution timing: Check

Checking sequence

–	Remove upper notched belt guard.

–	Set the crankshaft to the top dead centre of cylinder 1. The groove on the pulley must be aligned with the edge of the marking -O- .

–	The locking spaces on the camshaft sprockets should line up with the spaces on the camshaft housing -arrows-.

Note

If the marks are on opposite sides of the notched belt sprockets, turn the crankshaft one more turn.

SEAT Workshop Service and Repair Manuals