| When working on the fuel supply/injection system, pay careful attention to the following cleanliness rules: |
| t
| Thoroughly clean connections and surrounding area before releasing them. |
| t
| Place removed parts on a clean surface and cover. Use only lint-free cloths. |
| t
| Carefully cover or seal open components if repairs cannot be carried out immediately. |
| t
| Only fit clean components: Only remove new parts from their packaging immediately before fitting. Do not use parts that have been stored loose (e.g. in toolboxes etc.). |
| t
| If the system is open: do not work with compressed air if this can be avoided. Do not move vehicle unless absolutely necessary. |
| t
| Avoid spilling diesel on the coolant hoses. If necessary, clean the hoses immediately. Damaged hoses must be replaced. |
|
|
|
