Leon Mk2
|
1 - | Central tube for dash panel |
2 - | Fuses (2 each) |
q | Always replace |
q | Mount on the pins |
3 - | Pin |
q | Insert into clutch pedal and brake pedal |
q | Lock pin in pedal. |
4 - | Support buck |
q | Stop plate for accelerator pedal |
q | Removing and installing for vehicles with manual gearbox → Chapter |
5 - | Hexagon socket head bolt, 10 Nm |
6 - | Accelerator pedal module |
q | Screw into the pedal bracket |
7 - | Bolt with washer, 25 Nm |
q | Tighten only after installing brake booster in vehicle |
8 - | Brake light switch |
q | removing and fitting → Chapter |
9 - | Clutch switch |
10 - | Cylindrical bolts, 5 Nm |
q | Must engage in the bolt recess → Item |
q | Tighten the screw only when the safety washer has been fitted → Item |
11 - | Bolt with washer, 20 Nm |
q | Always replace |
12 - | Brake pedal |
q | Fit pin. |
q | Engage brake pedal in brake servo (you should hear it click into place). |
q | Removing and installing for vehicles with manual gearbox → Chapter |
13 - | Pump |
q | Do not remove seal |
14 - | Compression spring |
q | White spring mounting to pedal bracket, black spring mounting to clutch pedal |
15 - | Retaining clip |
16 - | Clutch pedal |
q | Fasten by adjusting clutch pump |
q | Attach to bolts → Item |
17 - | Jointing pin |
q | Install pedal mount on assembly bolt |