seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing and removing the brake calliper > < Removal:

Leon Mk2

Installation
Installation
   
–  Fit the pad securing springs to the brake backplate -arrows- and the pads.
  N46-10014
–  Ensure that the brake pads are located correctly in the pad retainers -arrows-.
–  Secure brake calliper with new self-locking bolts.
t  The repair kit includes 4 self-locking hexagon bolts which must always be installed.
After moving the pistons forwards using → Vehicle diagnostic, testing and information system VAS 5051, carry out a basic setting of brake system.
–  Carry out basic setting of brake system using → Vehicle diagnostic, testing and information system VAS 5051.
–  Fit the wheels.
Tightening torque for wheel bolts → Running gear, axles, steering; Rep. gr.44.
  Note
Check brake fluid level after changing brake pads.
  N46-10015
Tightening torque: 
Hexagonal bolt, brake calliper to the brake back plate
t  Use new screws!
35 Nm

   

Installing and removing the brake calliper > < Removal: