seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servicing front wheel brakes, Cupra -R- brake caliper > < Removing

Leon Mk2

Installing
Installing
  Note!
Before inserting new brake pads, press piston back into the cylinder with resetting tool. Before pressing the piston back, draw off brake fluid from the reservoir with a bleeder bottle. Otherwise particularly if reservoir has been topped up, fluid will overflow and cause damage.
   
–  Press piston back.
–  Insert brake pads.
–  Swing brake caliper housing down and tighten hexagon bolt to 35 Nm.
  Note!
t  The repair kit includes four self-locking hexagon bolts which must installed in all cases.
t  After replacing the brake pads, depress pedal firmly several times with the vehicle stationary so that the brake pads are properly seated in their normal operating position.
  E46-0001

Servicing front wheel brakes, Cupra -R- brake caliper > < Removing