Leon Mk2
| Assembly overview: Shock absorber, coil spring (all-wheel drive) |
| 1 - | Lower spring seat |
| q | Turn end of spring against stop |
| 2 - | Assembly tool |
| q | Not necessary to reinstall once removed |
| 3 - | Coil spring |
| q | Note different running gear versions; see → Chapter, vehicle data sticker |
| q | removing and installing → Chapter |
Note| Note information for conversion to Nivomat under all circumstances → Chapter. |
| 4 - | Upper spring seat |
| 5 - | Bolt. |
| q | 180 Nm |
| q | Always renew if removed |
| 6 - | Bolt. |
| q | M10 x 35 |
| q | 50 Nm and then turn 45° further |
| q | Always renew if removed |
| 7 - | Shock absorber |
| q | removing and installing → Chapter |
| q | Take different running gear types into account → Chapter |
Note| Note information for conversion to Nivomat under all circumstances → Chapter. |
| 8 - | Washer |
| 9 - | Lower transverse arm |
| q | removing and installing → Chapter |
| 10 - | Wheel bearing housing |
| q | removing and installing → Chapter |
