seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Steering mount and steering column: fitting > < Assembly overview of steering mount and the steering column

Leon Mk2

Steering mount and steering column: removing
Steering mount and steering column: removing
Special tools and workshop equipment required
   
t  Hook -3438-
The steering mount and the steering column can only be disassembled once removed from the vehicle. Removing and fitting the steering mount and the steering column → Chapter.
–  Separate the upper element from the lower element of the steering mount by pulling both elements in opposite directions.
  W00-0379
–  Loosen the bolt of the steering column combination switch -arrow-, and remove the combination switch.
  N48-0467
–  Loosen the springs -arrows- with the hook -3438-.
–  Release the column height and depth adjustment lever.
–  Loosen the nut -1- and remove the washers -2- and -3-.
–  Remove the spring element -4- and the track -5- from the support block.
–  Remove the height and depth adjustment lever from the support block and steering mount.
  N48-0468
–  Remove the tracks -1- from the steering mount.
  N48-0469
–  Press the tab -arrow- down, and pull the guide tube -1- out of the steering mount in the direction of the arrow.
  N48-0470

Steering mount and steering column: fitting > < Assembly overview of steering mount and the steering column