Leon Mk2
| Assembly overview |
| 1 - | Bracket |
| q | On the gearbox bracket |
| 2 - | Spacer |
| 3 - | Clamp |
| 4 - | Return hose |
| 5 - | Spring type clamp |
| q | The coloured marking coincides with arrow on the tank |
| 6 - | Spring type clamp |
| 7 - | Tank |
| q | Oil level: Between min. and max. while the engine temperature is at 50 °C C approx. |
| q | Check the oil level with the lock plate bolted |
| q | The level of oil should not go past the min. mark when the engine is cold |
| q | Open the cover. |
| 8 - | Suction hose |
| q | The colour mark coincides, depending on the version, with the separation edge of the case or the mark on the pump tube |
| 9 - | Join ring |
| q | Always replace |
| 10 - | Pressure tubing |
| 11 - | Hollow bolt |
| q | 30 Nm |
