skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Inspecting ATF level > < Tightening torques
Checking and topping up ATF level
Checking and topping up ATF level
Special tools and workshop equipment required
t  Torque wrench (5...50 Nm), e.g. -V.A.G 1331-
t  Diagnostic cable -V.A.G 1551/3-
t  Vehicle system tester -V.A.G 1552-
t  ATF filling system -V.A.G 1924-
If ATF is added, use ATF with Spare Part No. -G 052 990 A2-.
   
–  The gasket ring -arrow- for the screw plug for ATF inspection must always be replaced.
  N38-0037

Inspecting ATF level > < Tightening torques