skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing shift mechanism > < Control cables as of 06.06

Fabia Mk1

Plastic relay lever
Plastic relay lever
Removing and installing the plastic relay lever
   
–  Pull forward the locking mechanism as far as the stop in -direction of arrow 1-, then lock by turning to the left in -direction of arrow 2-.
l  In order to avoid damage to the selector cable, the cable lock must be separated from the selector cable before removal.
l  Gearshift lever is located in the neutral position.
  S34-1116
–  Carefully press down the catch -arrow 1- of the relay lever up to the stop.
–  Afterwards carefully pull relay lever out of its bearing point in the cover. To do so move relay lever back and forward (direction of operation).
l  Only remove the cable lock on removed relay lever → Fig.
  Note
To install, grease bearing points and friction surfaces with grease -G 000 450 02-.
–  Press cable lock onto the relay lever → Fig.
–  Insert relay lever together with cable lock.
l  The catch -arrow 1- secures the relay lever.
l  The cable lock must be located behind the catch -arrow 2-.
l  Pay attention to secure catch.
  N34-10885
Lever off cable lock for selector cable from plastic relay lever.
l  The relay lever is removed.
–  Position a cross-head screwdriver -A- between the bush -B- and the relay lever.
  N34-10886
Press on cable lock
l  The relay lever is removed.
l  The cable lock must only be pressed onto the bush -arrow-.
l  The cable lock must move freely on the relay lever.
l  It must be located behind the catch → Anchor.
  N34-10902

Removing and installing shift mechanism > < Control cables as of 06.06