| Removing and installing the cylinder head |
| Special tools and workshop equipment required |
| t
| Supporting device -MP 9-200 (10-222A)- |
| t
| Catch pan, e.g. -VAS 6208- |
| t
| Pliers for spring strap clamps |
| t
| Hand vacuum pump, e.g. -VAS 6213- or -V.A.G 1390- |
| t
| Ventilation reservoir e.g. -V.A.G 1390/1- |
| t
| Sealant remover gasket stripper (bearing code GST, bearing article no. R 34402), manufacturer Retech s.r.o. |
WARNING | When undertaking all assembly work, particularly in the engine compartment due to its cramped construction, please observe the following: |
| t
| Lay lines of all kinds in such a way that the original line guide is re-established. |
| t
| Ensure that there is adequate free access to all moving or hot components. |
|
|
|
|
