Fabia Mk1
For engines with identification characters AZQ, BME |
1 - | Solenoid valve 1 for activated charcoal filter -N80- |
q | Resistance value: 22…30 Ω |
2 - | The vacuum regulating valve (PCV valve) |
q | for crankcase ventilation |
q | Pay attention to the part number |
3 - | Injection valves -N30…N32- |
q | Resistance value: 12…17 Ω (at approx. 20 °C) |
q | Inspecting the injection rate, tightness and jet formation of the injectors → Chapter |
4 - | Engine speed sender -G28- |
q | Fitting location: on the suction side of the crankcase |
q | check → Vehicle diagnostic tester |
5 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
q | Fitting location: at intake manifold |
6 - | Throttle valve control unit -J338- |
q | check → Vehicle diagnostic tester |
7 - | Coolant temperature sender -G62- |
8 - | Engine control unit-J361- |
q | Control unit Simos |
9 - | 4-pin plug |
q | for lambda probe downstream of catalytic converter -G130- and heater of lambda probe 1 downstream of catalytic converter -Z29- |
q | Brown |
10 - | Plug connection |
q | for lambda probe upstream of catalytic converter -G39- and heater for lambda probe upstream of catalytic converter -Z19- |
q | 6-pin for engine with identification characters AZQ. |
q | 4-pin for engine with identification characters BME. |
q | black |
11 - | Exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212- |
q | mounted up to 11/2005 |
q | check → Vehicle diagnostic tester |
12 - | Knock sensor 1 -G61- |
q | Fitting location: on the suction side of the crankcase |
13 - | Lambda probe upstream of catalytic converter -G39-, 50 Nm |
q | Fitting location: in the exhaust manifold |
q | check → Vehicle diagnostic tester |
14 - | Ignition coils with power output stage -N70-, -N127-, -N291- |
q | resistances → Chapter |
15 - | Camshaft position sensor -G163- |
q | check → Vehicle diagnostic tester |
16 - | Earth point -19- |
q | on the cylinder head cover |
|