skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing loudspeakers > < Overview of radio system

Fabia Mk1

Removing and installing radio
Removing and installing radio
Special tools and workshop equipment required
t  Release tool for radio -T30005-
Removing
  Note
t  Before disconnecting the battery determine the code of radio sets fitted with anti-theft coding.
t  If the radio is replaced, advise the customer of the new code number.
   
–  Insert release tool into the release slot (see figure) until it locks in place.
–  Remove radio from the dash panel using the grab rings on the release tool.
  Note
t  Release tool -T30005- must not be pushed to the side or twisted for remoing the radio.
t  In order to pull off the release tool again, press in the side catches at the radio set.
–  Remove aerial cable.
–  Separate the electrical plug connections.
Install
–  Connect aerial cable.
–  Insert the connectors.
–  Carefully insert radio into dash panel until it locks in the installation slot.
–  Connect earth cable of the battery.
  Note
Perform certain reworking after connecting the battery → Chapter.
  S91-0048

Removing and installing loudspeakers > < Overview of radio system