skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing gasket ring for right flange shaft (Fabia II, Roomster) > < Removing

Fabia Mk2

Install
Install
–  Lightly oil new gasket ring at outer surface.
   
–  Fill half the space between the sealing lip and dust lip with sealing grease -G 052 128--arrow-.
  N32-10016
–  Drive in new gasket ring with pressure plate -T30028 (3305)- up to the stop. Do not tilt the new gasket ring during this process.
–  Insert the flange shaft.
–  Tighten new conical screw to the recommended tightening torque → Anchor.
–  Attach the left drive shaft to the flange shaft → Chassis; Rep. gr.40.
–  Change gearbox oil → Chapter.
  Note
The gearbox oil must be changed, only in this way the correct gear oil level can be ensured.
–  Install left front wheel → Chassis; Rep. gr.44.
–  Install the noise insulation → Body Work; Rep. gr.50.
  N39-10403
Tightening torque
ComponentNm
Flange shaft on gearbox (conical screw)1)30

1) Always replace conical screw → Electronic Catalogue of Original Parts.
   

Replacing gasket ring for right flange shaft (Fabia II, Roomster) > < Removing