Fabia Mk2
| Summary of components - mechatronics for double clutch gearbox -J743- |
Note| t | The »new«mechatronics for the gearbox is already precisely filled with oil at the factory, do not drain the oil. |
| t | The »removed«mechatronics is sent back with oil (close the ventilation opening with a suitable plug). |
| t | Pay attention to the ventilation when handling the mechatronics. |
| t | During assembly work, remove the cover of the ventilation and close with a suitable screw plug. In case of oil leakage from the mechatronics, the mechatronics must be replaced → Electronic Catalogue of Original Parts. |
| 1 - | Screw, 10 Nm |
| q | 3 pieces, M8 x 35 |
| q | always replace → Electronic Catalogue of Original Parts |
| q | for attaching the mechatronics for double clutch gearbox -J743- at gearbox housing |
| 2 - | Screw, 10 Nm |
| q | 4 pieces, M8 x 90 |
| q | always replace → Electronic Catalogue of Original Parts |
| q | for attaching the mechatronics for double clutch gearbox -J743- at gearbox housing |
| 3 - | Mechatronics for double clutch gearbox -J743- |
| q | The mechatronics is allocated according to the gearbox code letters → Electronic Catalogue of Original Parts. |
| q | Place the mechatronics by hand in the »removal position« → Chapter |
| Gearbox installed: |
| q | Remove mechatronics → Chapter |
| q | Install mechatronics → Chapter |
| Gearbox removed: |
| q | Remove mechatronics → Chapter |
| q | Install mechatronics → Chapter |
|
|
